ACCESS DIAMOND has two primary styles of Reamers...

STRAIGHT REAMER: In which the OD of the diamond section and the shank OD are the same size. This type is used most often used when the face is doing all of the work.

STEPPED REAMER: The Stepped Reamer has relief behind the diamond section at a requested length by customer. This also allows for more flexibility when a specific shank OD is required as well as for use when side cutting and blind hole applications are key.

Reamer Enhancements also available upon request...
1. Side and/or Face Slots for more aggressive freer reaming performance.
2. Corner Radius for smoother entry or to leave that feature in your material.
3. Full Radius on the Face for generating a radius in your material.

REAMER SIZES: Available from .026" - .500" OD after which these become a mounted wheel, which carries the same basic requirements for quoting.

CHAMFER/COUNTERSINK TOOLS:
Made to order ALL Sizes and in the Same Bonds as the Reamers...commonly used for Chamfering or Breaking an Edge on your material or to Produce a Specific Angle requirement. The standard angles are 45, 60 and 90 degrees but not limited to these.
SIZES start as small as .125" OD

We Gladly Welcome Requests for Quotes of Your Own Design

Request Printed Literature                                                   Quote/Order Today!